Tunable CO2 laser

Model: PRC T 1000

Contact Person: Catalin LUCULESCU
Email: catalin.luculescu@inflpr.ro
Tel: +4021 457 4550/ ext. 2422

Location: CETAL – Room A-102
Financing project: CETAL 8PM /I 26.11.2008

http://cetal.inflpr.ro/co2
http://cetal.inflpr.ro/co2

PRC T 1000 Laser Specifications

  Laser Specifications Values Observations
1 Tuning Range Wavelength 9.2 - 11.2 μm  
2 Rated Power 1000 Watts Expect less power at several wavelength
3 Dynamic Power Range 0 Watts to 1000 Watts  
4 Power Stability ±0.5% of rated power relative to a mean value  
5 Beam Mode    
6 Beam Divergence Less than 1.0 mrad (half angle)  
7 Beam Size 13 mm Dia. @ 1/e2 point at the Output Coupler  
8 Minimum Clear Aperture 18 mm  
9 Pointing Stability Less than 0.2 mrad  
10 Polarization 45° plane or vertical plane  
11 Pulsing Hyperpulse® CW to 1 kHz Superpulse CW to 1 kHz Gated Pulse CW to 5 kHz  
12 Laser Gases Helium, Nitrogen, Carbon Dioxide regulated to 4 bar (60 psi) each gas  
13 Laser Gas Consumption 25 liters per hour total  
14 Output Coupler Purge Gas and Shutter Operating Gas Clean, dry, filtered air (Nitrogen Optional) regulated to 4 bar (60 psi)  
15 Purge Gas Consumption 200 liters per hour  
16 Maximum Power Consumption at Maximum Power 24.6 kVA (at 460 V, 60 Hz; 420 V, 50/60 Hz; and 380 V, 50/60 Hz)  
17 Heat Load 18 kW (61,380 BTU/Hr.) at 40°C (104°F) ambient temperature  
18 Coolant Mixture 60% distilled water/40% recommended coolant  
19 Coolant Temperature 20°C (68°F)  
20 Coolant Temperature Stability ±2°C (±4°F) maximum  
21 Coolant Flow 68 liters (18 gallons) per minute minimum  
22 Inlet Pressure 4.0 Bar (60 psi) min., 10 Bar (150 psi) max.  
23 Pressure Drop through Laser 2.7 Bar (40 psi) [at minimum flow]  
24 Temperature 0°C (32°F) to 40°C (104°F) ambient  
25 Relative Humidity Up to 95% (dehumidifier available)